Wrights Machinery - Cable Strippers, Balers, Shears, Engineers http://www.wrightsmachinery.co.uk Mon, 14 Jun 2010 14:19:04 +0000 http://wordpress.org/?v=2.9.2 en hourly 1 Bonfiglioli car baler http://www.wrightsmachinery.co.uk/2010/06/bonfiglioli-car-baler/ http://www.wrightsmachinery.co.uk/2010/06/bonfiglioli-car-baler/#comments Mon, 14 Jun 2010 13:49:17 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=756 The Ariete baler is the best sold baler in Europe. It consists of a compacting box a loading crane with a rotating grab and operators cabin. (Also available without the cabin and grab) The manufacturing material is high strength steel (the compacting box is made of hardox 500).

Specification

6 Cylinder diesel engine of 130 HP  which moves 3 high pressure pumps.
Bale dimension = 850 x 640mm with variable length
Its possible to compact 10/12 ton per hour of any kind of scrap.
The crane has an hydraulic outreach of 6.2m and loads 1300kg.
Crane maximum loading capacity = 3000kg
Outer baler dimensions:
Length 6200 mm
Width 2450 mm
Height 2500 mm
The baler can be mounted:
1) on a truck
2) on a semi trailer
3) on the ground
4) on a truck equipped with a roll on roll off device without going over the maximum height of 4 metres.

Contact Us

For more information on this product please contact us.

[contact-form] ]]> http://www.wrightsmachinery.co.uk/2010/06/bonfiglioli-car-baler/feed/ 0 Shredders http://www.wrightsmachinery.co.uk/2010/01/shredders/ http://www.wrightsmachinery.co.uk/2010/01/shredders/#comments Thu, 28 Jan 2010 13:39:22 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=637

 These shredders are for shredding  hardwood, softwood, chipboard, MDF, cardboard, plastics  and other materials. For the plastic shredding these machines are reinforced.

The advatages of having a Zerbirk Shredder are:

Robust Technology 
Economic disposal of various materials
High reliability and high level of utility
Use in crafts and industries
Performance by clock control of the hydraulic pusher 
Programmable Logic Controller (PLC)
Touch screen for fast troubleshooting (optional)

 PZ 63- 1 Series

Hopper Opening

Rotor Diameter

Motor
 630 x 820mm 260mm  15.0 kW
 630 x 820 mm 260mm 18.5 kW

PZ 63- 2 Series

Hopper Opening

Rotor Diameter

Motor
630 x 900 mm 360mm  15.0 kW
630 x 900 mm 360mm 18.5 kW
630 x 900 mm 360mm 22.5 kW

PZ 83- 1 Series

Hopper Opening

Rotor Diameter

Motor
830 x 995 mm 260mm  22.0 kW
830 x 1000 mm 360mm 18.5 kW
830 x 1000 mm 360mm 22.0 kW
830 x 1000 mm 360mm 30.0 kW
830 x 1000 mm 360mm 37.0 kW

PZ 103-2 Series

Hopper Opening

Rotor Diameter

Motor
1030 x 1235 mm 360mm  22.0 kW
1030 x 1235 mm 360mm 30.0 kW
1030 x 1235 mm 360mm 37.0 kW
1030 x 1235 mm 360mm 55.0 kW

PZ 123-2 Series

Hopper Opening

Rotor Diameter

Motor
1230 x 1235 mm 360mm  22.0 kW
1230 x 1235 mm 360mm 30.0 kW
1230 x 1235 mm 360mm 37.0 kW
1230 x 1235 mm 360mm 55.0 kW

PZ 153 -2 Series

Hopper Opening

Rotor Diameter

Motor
1530 x 1535 mm 360mm  30.0 kW
1530 x 1535 mm 360mm 37.0 kW
1530 x 1535 mm 360mm 45.0 kW
1530 x 1535 mm 360mm 55.0 kW
1530 x 1535 mm 360mm 75.0 kW

Contact Us

For more information on these products please contact us.

[contact-form] ]]> http://www.wrightsmachinery.co.uk/2010/01/shredders/feed/ 0 Used Lukas hydraulic cutter http://www.wrightsmachinery.co.uk/2010/01/used-lukas-hydraulic-cutter/ http://www.wrightsmachinery.co.uk/2010/01/used-lukas-hydraulic-cutter/#comments Thu, 28 Jan 2010 10:12:17 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=665 Used Lukas hydraulic cutter LKS 35 EN. This cutting and spreading of this combi tool matches the performance on the standard cutter and spreader.

Technical Information

Petrol engine
Combi blade
Cutting force: Up to 350 lb
Spreading distance: 360mm

Contact Us

For more information on this product please contact us.

[contact-form] ]]> http://www.wrightsmachinery.co.uk/2010/01/used-lukas-hydraulic-cutter/feed/ 0 150 Alligator Shear http://www.wrightsmachinery.co.uk/2010/01/150-alligator-shear/ http://www.wrightsmachinery.co.uk/2010/01/150-alligator-shear/#comments Thu, 28 Jan 2010 09:15:59 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=657 The 150 shear is the ideal machine for your lighter metal shearing. This machine is small making it easy to be moved around the yard.

 This machine is designed to be bench mounted and is operated by a foot pedal.

 

 

Technical Information

Blade length: 150mm
Blade opening tip to tip: 105mm
Motor: 1.5kW Single phase
Length: 660mm
Width: 520mm
Height: 620mm
Weight: 150kg

Contact Us

For more  information on this product please contact us.

[contact-form] ]]> http://www.wrightsmachinery.co.uk/2010/01/150-alligator-shear/feed/ 0 250 Alligator Shear http://www.wrightsmachinery.co.uk/2010/01/250-alligator-shear/ http://www.wrightsmachinery.co.uk/2010/01/250-alligator-shear/#comments Thu, 28 Jan 2010 07:46:33 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=726 The Firec  Alligator shear is a compact hydraulic shear unit designed to cut cable with a diameter of up to 100 mm,non-ferrous metals e.g. copper, aluminium and brass into manageble sizes. The two identical blades can each be rotated four times before resharpening becomes necessary. 
 The guard on the shear incorporates a locking bar for those materials that are prone to lift when being cut.

 

Technical Information

Blade length: 250mm
Cutting Capacity: 25mm
Motor: 4kW 3 phase
Length: 940mm
Width: 870mm
Height: 1220mm
Weight: 335kg

Contact Us

For more information on this product please contact us.

[contact-form]

 

]]> http://www.wrightsmachinery.co.uk/2010/01/250-alligator-shear/feed/ 0 Used Deltax 201 Cable Stripper http://www.wrightsmachinery.co.uk/2010/01/used-deltax-201-cable-stripper/ http://www.wrightsmachinery.co.uk/2010/01/used-deltax-201-cable-stripper/#comments Wed, 27 Jan 2010 16:10:55 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=624 The free standing deltax 201 cable stripper has been re-conditioned and is ready for us to  re-paint.

Cutting Capacity: 1.5mm – 115mm diameter
Speed: Approximately 35 meters per minute
Power: 2.2kw (3HP) Single phase
Length: 760mm
Width: 730mm
Height: 1200mm
Weight: 350kg

This machine can be seen in full working order.

Price on application

Contact Us

For more information on this product please contact us.

[contact-form] ]]> http://www.wrightsmachinery.co.uk/2010/01/used-deltax-201-cable-stripper/feed/ 0 Euromec Eurobaler http://www.wrightsmachinery.co.uk/2010/01/euromec-eurobaler/ http://www.wrightsmachinery.co.uk/2010/01/euromec-eurobaler/#comments Wed, 27 Jan 2010 14:47:03 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=588 The Eurobaler is an affordable car baler available in two different sizes. This machine is designed for quick and total mobilty.

 

 

 

 

Machine Specification

Cummins diesel engine
Box Length: 4.85 or 4.5 metres
Bale size: 860mm x 860mm x variable depending on the compacted material
Pushing cylinder force: 150 tonne
Cover cylinder force: 360 tonne
Weight: From 19.6 to 23.2 tonne
Automatic Cycle
Manual Control

Optional Extras

Radio Control
Bale Ejection Door
Remote control ( only for the WITHOUT CRANE version)
Hydraulic stabalising legs
Wide view operating cabin
Crane

Eurobaler car balerEurobaler
 

Contact Us

For more information on this product please contact us.

[contact-form]

]]> http://www.wrightsmachinery.co.uk/2010/01/euromec-eurobaler/feed/ 0 320 Alligator Shear http://www.wrightsmachinery.co.uk/2010/01/320-alligator-shear/ http://www.wrightsmachinery.co.uk/2010/01/320-alligator-shear/#comments Wed, 27 Jan 2010 10:43:57 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=671 The 320 shear is an ideal machine for cropping aluminium, copper and also cable into smaller lengths.
This machine is on wheels making it easy to move arounf the yard. The  320 shear is operated by a foot pedal.

 

 

Technical Information

Blade length: 300mm
Blade opening tip to tip: 185mm
Motor: 10hp 7.5kW 3 phase / 5hp 3.7kW Single phase
Length: 1372mm
Width: 720mm
Height: 1282mm
Weight: 660kg

 Contact Us

For more information on this product please contact us.

[contact-form] ]]> http://www.wrightsmachinery.co.uk/2010/01/320-alligator-shear/feed/ 0 Superstripper 600 HD http://www.wrightsmachinery.co.uk/2010/01/superstripper-600-hd/ http://www.wrightsmachinery.co.uk/2010/01/superstripper-600-hd/#comments Wed, 27 Jan 2010 09:20:35 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=557 The heavy duty 600 are specially manufactured to the customers need. The construction of this machine is completely different and this machine is considerably heavier.

This machine can be constructed to go up to 300mm diameter cable which aids in recycling the unbilicol cable from the oil industry.

proef12-4-076Radoskabel116-small

 

 

Contact Us

For more information on this product please contact us.

[contact-form] ]]> http://www.wrightsmachinery.co.uk/2010/01/superstripper-600-hd/feed/ 0 Euromec Raptor Shear Baler http://www.wrightsmachinery.co.uk/2010/01/euromec-raptor-shear-baler/ http://www.wrightsmachinery.co.uk/2010/01/euromec-raptor-shear-baler/#comments Tue, 26 Jan 2010 14:51:07 +0000 Wright Engineers http://www.wrightsmachinery.co.uk/?p=583 The Raptor shear baler has been engineered for fast and complete mobilty. The Raptor is the only one to have a case of preloading “fully integrated” in the structure.

The Raptor can come with hydraulic stabilizers to ensure fast loading and unloading and positioning.

 

 

 

Machine Specification

Cummins diesel engine
Box Length: 5260mm
Bale size: 850mm x 650mm x variable depending on the compacted material
Pushing power force: 150 tonne
Wings total  force: 360 tonne
Shear Force: 600 tonne
Presser Power: 76 tonne
Automatic Cycle
Manual Control

 

Optional Extras

Radio Control
Hydraulic stabalising legs
Wide view operating cabin
Pre-load box

 Raptor shear baler shearingShear baler- Raptor

Contact Us

For more information this product pleaes contact us.

[contact-form]
]]> http://www.wrightsmachinery.co.uk/2010/01/euromec-raptor-shear-baler/feed/ 0